The whole bed is cast, the base adopts an overall inverted T-type layout, and the z-axis adopts a movable column structure
Each linear motion axis adopts imported wide-range heavy-load linear roller guide
Rotary table with four taper pin over positioning
Main motor adopts FANUC wide area motor (ap)
机内两套螺旋排屑机构，机外刮板式排屑器
可选装各种测头及光栅系统
可选用双交换工作台
Strong, compact body
The main structure castings are made of high quality Meehanite cast iron, with stable structure and permanent quality assurance
Continuously shorten the acceleration/deceleration time of the spindle and change the tool time, increase the feed speed, reduce the auxiliary time, and improve the cutting efficiency
| Specifications | H50 series | H63 series | H80 series | |||||
| Project name | H50 | H50/1 | H63 | H63/1 | H80 | H80/1 | ||
| (single table) | (Exchange Workbench) | (single table) | (Exchange Workbench) | (single table) | (Exchange Workbench) | |||
| Bench | working desk size | 500x600mm | 500x630mm | 630x700mm | 630x700mm | 800x800mm | 800x800mm | |
| Table indexing | 1°（0.001°） | 1°（0.001°） | 1°（0.001°） | 1°（0.001°） | 1°（0.001°） | 1°（0.001°） | ||
| Workbench maximum load | 800kg | 800kg | 1200kg | 1200kg | 1500kg | 1500kg | ||
| Maximum workpiece rotation diameter | φ750mm | φ750mm | φ1000mm | φ1000mm | φ1600mm | φ1600mm | ||
| Stroke | Inverted T layout | Workbench moves left and right (X direction) | 740mm | 740mm | 1050mm | 1050mm | 1300mm | 1300mm |
| Spindle box moves up and down (Y direction) | 680mm | 680mm | 800mm | 800mm | 1000mm | 1000mm | ||
| Columns move back and forth (Z direction) | 650mm | 650mm | 900mm | 900mm | 1000mm | 1000mm | ||
| Spindle [synchronous belt 1:1 drive] | BT50 ring spray | Spindle bearing inner diameter | 100mm | 100mm | 100mm | 100mm | 100mm | 100mm |
| Maximum speed | 6000rpm | 6000rpm | 6000rpm | 6000rpm | 6000rpm | 6000rpm | ||
| Spindle centerline to table distance | 120-800mm | 0-680mm | 120-920mm | 0-800mm | 120-1120mm | 0-1000mm | ||
| pindle face to center of table | 130-780mm | 130-780mm | 130-1030mm | 130-1030mm | 200-1200mm | 200-1200mm | ||
| Fast moving speed | X direction, Y direction, Z direction | 36m/min | 36m/min | 36m/min | 36m/min | 36m/min | 36m/min | |
| B axis | 10r/min | 10r/min | 10r/min | 10r/min | 10r/min | 10r/min | ||
| Magazine | Tool selection method | random | random | random | random | random | random | |
| Pull type | Type MAS 2 | Type MAS 2 | Type MAS 2 | Type MAS 2 | Type MAS 2 | Type MAS 2 | ||
| Number of tools | 40（60） | 40（60） | 40（60） | 40（60） | 40（60） | 40（60） | ||
| Maximum tool diameter (adjacent) | φ115mm | φ115mm | φ115mm | φ115mm | φ115mm | φ115mm | ||
| Maximum tool diameter (adjacent knife) | φ250mm | φ250mm | φ250mm | φ250mm | φ250mm | φ250mm | ||
| Maximum tool length | 450mm | 450mm | 450mm | 450mm | 450mm | 450mm | ||
| Maximum tool weight | 25kg | 25kg | 25kg | 25kg | 25kg | 25kg | ||
| Tool change time (knife to knife) (change with tool weight) | 2.5s | 2.5s | 2.5s | 2.5s | 2.5s | 2.5s | ||
| Tool change time (cut to cut) (change with tool weight) | 6s | 6s | 6s | 6s | 6s | 6s | ||
| APC | Pallet exchange | 2-sided rotation | 2-sided rotation | 2-sided rotation | 2-sided rotation | 2-sided rotation | 2-sided rotation | |
| Pallet exchange time | 15s | 15s | 15s | 15s | 15s | 15s | ||
| Positioning accuracy (GB) | X direction, Y direction, Z direction | 0.01mm(Full course） | 0.01mm(Full course） | 0.01mm(Full course） | 0.01mm(Full course） | 0.01mm(Full course） | 0.01mm(Full course） | |
| Repeated positioning accuracy (GB) | X direction, Y direction, Z direction | 0.006mm(Full course） | 0.006mm(Full course） | 0.006mm(Full course） | 0.006mm(Full course） | 0.006mm(Full course） | 0.006mm(Full course） | |
| CNC system | FANUC system、SIEMENS system、Mitsubishi system | |||||||
